Rebar drawing machine is a widely used mechanical equipment in industrial applications. The steel wire drawing machine system is a device with very high requirements for speed control. The control system is required to increase the speed of the wire drawing machine to provide very precise and smooth line speeds. The price of the wire drawing machine used for drawing gold wire is higher than that of the ordinary wire drawing machines. The whole system is more complicated, with many control devices, and high coordination among the motors is required.
The steel wire drawing machine system is controlled by 4 sets of servo motors, and each servo stainless steel wire drawing machine has real-time data exchange. The bus communication capability supported by servo can fully satisfy the real-time data interaction between the various axes of the rebar wire drawing machine.
The system requires fast interaction of data between the motor shafts. In order to ensure that the wire can be quickly calculated according to the required algorithm, the trajectory and wire are in place. The internal firmware function of the servo is also fully utilized, and the motor is driven by the driver to calculate the wire. The time delay caused by the traditional wire drawing machine control system calculating the wire position through the controller and then transmitting to the driver is omitted.
When the wire drawing machine is working, there will always be very loud noises. According to the cause of the wire drawing machine noise, it can be known that the noise is caused by the severe vibration caused by the imbalance force when the grinding head grinds the brick. It is the real cause of the noise.
It can simplify the schematic diagram of its operation and analyze the individual abrasive particles. Through the vibration analysis of the grinding head of the tank polishing machine, it is concluded that the factors affecting the noise of the grinding head are the width of the grinding and the speed of the grinding head of the polishing machine. You can select the appropriate grinding width and speed to prevent resonance and effectively control the noise of the wire drawing machine. Improving the width of grinding and the rotating speed of the grinding head can make the noise disappear.
The information is provided by barbed wire making machine suppliers.